Number：

04_02曾憲中

Download

摘要檔
全文檔

Name：

Sheng-Chung Tzeng

Titles：

Author：

Paper name：

Heat transfer characteristics of a rotating cylinder with a lateral impinging air jet

Name of activity：

International Journal of Heat and Mass Transfer

Keywords： Rotating cylinder Lateral impinging jet heat transfer Experiment

Abstract：This study experimentally investigated the heat transfer characteristics of a rotating cylinder under lat-eral air impinging jet.The height and diameter of the cylinder were fixed,and the variable parameters were as follows(1)the jet Reynolds number (Rej=655-60237);(2)the rotational Reynolds number(Rer=1975-7899);(3)the ratio of the cylinder diameter(D) to the nozzle width(w)(D/w=2-16);(4)the relative jet-impinging distance(L/w=1-16,l is the shortest nozzle-to-cylinder distance).This exper-iment measured detailed temperature on the heated wall surface of the cylinder using an infrared thermo tracer,and observed the smoke flow characteristics of the stationary and rotating cylinder under imping-ingjet flow using visualization technique.The experimental results showed that the rotation changed the separation position of impinging jet flow on the cylinder,and allowed the surface temperature of the cyl-inder to tend towards uniformity along the circumferential direction of the cylinder.In addition,the heat transfer experiment included the pure rotating condition,the pure jet-flow condition and the coexistent condition of rotation and jet flow.The results showed that the average Nusselt number(Nu)increased with

the increase of Rej and Rer and decreased with the increase of D/w.The influence of D/w on Nu decreased with the increase of L/w,and Nu first increased and then decreased with the increase of L/w.in other words,there is a critical L/w value that can produce the highest Nu,and the critical L/w value increased with D/w.Finally,this study proposed reasonable and accurate empirical correlations of Nu in view of three test conditions.All the results can provide reference for practical design of the cooling system in relevant power machinery.

Back