建國科技大學 - 機械工程系製造科技碩士班(機械工程系/先進車輛組)102_國際期刊
|
編號 |
職稱 |
姓名 |
申請種類 |
論文名稱 |
發表刊物、研討會名稱 |
作者人數 |
發表年、月、日 |
Impact Factor |
下載 |
|
1 |
副教授 |
李金山 |
非JCB |
The Development and Design of a Laser Dertection System for Tire Thickness Measurment |
Appliied Mechanics and Materials |
李金山 |
2013.09 |
|
|
|
2 |
副教授 |
李金山 |
JCR C級 |
Optimization Of Injextion Molding Parameters For Led Lampshade |
Transactions of the Canadian Society for Mechanical Engineering |
李金山、-Chanf Lin |
2014.01 |
0.302 |
|
|
1 |
副教授 |
楊棟賢 |
非JCB |
The Effect of diectionally Chilled microstructure on Hypereutetic high-chromium white cast iron |
Advanced Materials Research(2014) Trans Tech Publications, Swizerland |
楊棟賢、Ji-Syuan Lin, Dar-Jen Pen, Fang-Ming Hsu |
2014 |
EI檢擻 |
|
|
2 |
副教授 |
楊棟賢 |
國內期刊(TSSCI、THCI) |
The study of brasion under different carbide particle size in high chromium white cast iron |
台灣鑄造年會 |
楊棟賢、廖翊婷、林季萱、許芳明 |
2013/12/02 |
|
|
|
1 |
副教授 |
周波 |
國際研討會 |
Chimney Effect on the Fluid Flow and Heat Transfer Characteristics of Finned Heat Sink for LED lamp |
The 2013 International Conference on Advances in Energy Research (ICER13), COEX, Seoul, Korea |
鄭澤明、曾憲中、周波、Po-Tsun Chen |
August 25-28 2013 |
|
|
|
1 |
教授 |
曾憲中 |
JCRA級 |
Experimental study of heat transfer characteristics in a 180-deg round turned channel with discrete aluminum-foam blocks |
International Journal of Heat and Mass Transfer, Vol. 71, pp. 133-141, 2014 |
鄭澤明、曾憲中、Rui Xu |
2014/4 |
2.315 |
|
|
2 |
教授 |
曾憲中 |
JCRA級 |
Heat transfer characteristics of a rotating cylinder with a lateral impinging air jet |
International Journal of Heat and Mass Transfer, Vol. 70, pp. 235-249, 2014. |
鄭澤明、曾憲中、Rui Xu |
2014/4 |
2.315 |
|
|
3 |
教授 |
曾憲中 |
JCRB級 |
Flow Visualization and Heat Transfer Characteristics of Oscillating Fluid through Pin-Fin Array in a Rectangular Channel |
Advances in Mechanical Engineering, Vol. 2013, Article ID 283830, pp. 1-7, 2013. |
鄭澤明、曾憲中、Wei-Ting Hsu, Guan-Wei Xu |
2013/11 |
1.062 |
|
|
4 |
教授 |
曾憲中 |
JCRC級 |
Flow Visualization and Thermal Behavior of Oscillating-Move Pin Arrays with Symmetrical Impinging Jets |
Journal of the Chinese Society of Mechanical Engineers, Accepted, 2014. |
鄭澤明、曾憲中、Chi-Huang Liu,Yu-Xiang Huang |
To be published/2014 |
0.274 |
|
|
5 |
教授 |
曾憲中 |
非JCR |
Experimental Study of Heat Energy Absorber with Porous Medium for Thermoelectric Conversion System |
Smart Science, Vol. 1, No.2, pp.1-5, 2013. |
鄭澤明、曾憲中、Hsu-Chieh Chou |
2013/12 |
|
|
|
6 |
教授 |
曾憲中 |
JCRC級 |
Experimental analysis of mixed convection heat transfer on heat sink of led lamp |
Transactions of the Canadian Society for Mechanical Engineering, Vol. 37, No. 3, pp. 693-702, 2013. |
曾憲中、鄭澤明 |
2013/12 |
0.302 |
|
|
7 |
教授 |
曾憲中 |
非JCR |
Design and Manufacture of an Energy-saving LED Lantern with Paper-cut Figure Projection Function |
Smart Science, Vol. 2, No.1, pp.13-19, 2014. |
贈澤明、曾憲中、Chi-Huang Liu, Dong-Jhen Lin, Bo-Jun Yang |
2014/3 |
|
|
|
8 |
教授 |
曾憲中 |
非JCR |
Cooling-performance estimation of the composite-graphite heat sink with annular conductive base for LED lamp |
Applied Mechanics and Materials, Vol. 496-500, pp. 9-12, 2013. |
Feng Li, Tzer-Ming Jeng, Shen-Chen-Chung Txeng, Po-Tsun Cheng |
2014/03 |
EI |
|
|
9 |
教授 |
曾憲中 |
非JCR |
Heat transfer of oscillating-move pin-fin heat sinks with circular impinging jets |
Applied Mechanics and Materials, Vol. 479-480, pp. 274-278, 2014. |
鄭澤明、曾憲中、Chi-Huang Liu |
2014/1 |
EI |
View |
|
10 |
教授 |
曾憲中 |
非JCR |
Heat Transfer of Oscillating Fluid through Finned Heat Sink with Top Bypass Clearance |
Applied Mechanics and Materials, Vol. 479-480, pp. 192-196, 2013. |
鄭澤明、曾憲中、Wei-Ting Hsu, Guan-Wei Xu |
2014/1 |
EI |
|
|
11 |
教授 |
曾憲中 |
非JCR |
Numerical Simulation and Flow Behaviors of Taylor Flow in Co-Axial Rotating Cylinder |
International Journal of Engineering and Technology Innovation, Vol. 4, No. 2, pp. 69-76, 2014. |
贈澤明、曾憲中、Wei Ping MA |
2014/4 |
|
|
|
12 |
教授 |
曾憲中 |
非JCR |
Development of Thermoelectric Conversion System for Waste Heat Recovery of Automobile Engine Exhaust Gas |
Applied Mechanics and Materials, Vol. 284-287, pp. 713-717, 2013. |
贈澤明、曾憲中 |
2013/7 |
EI |
|
|
13 |
教授 |
曾憲中 |
非JCR |
Natural Convection Heat Transfer of Annular Metal Porous Medium Heat Sink of LED |
Applied Mechanics and Materials, Vol. 284-287, pp. 844-848, 2013. |
Sheng-Chung Tzeng, Tzer-Ming Jeng, Zhi-Ting Yeh |
2013/7 |
EI |
|
|
14 |
教授 |
曾憲中 |
非JCR |
A Study of Heat Transfer Characteristics of LED Heat Sink and Graphite Heat Sink Process Technology Development |
Applied Mechanics and Materials, Vol. 284-287, pp. 819-823, 2013. |
曾憲中、毛祚飛、鄭澤明、楊士震 |
2013/7 |
EI |
|
|
1 |
副教授 |
鄭澤明 |
JCR_A級 |
Heat transfer characteristics of a rotating cylinder with a lateral impinging air jet |
International Journal of Heat and Mass Transfer, Vol. 70, pp. 235-249, 2014. |
鄭澤明、曾憲中、Rui Xu |
2014/01 |
2.315 |
|
|
2 |
副教授 |
鄭澤明 |
JCR_A級 |
Experimental study of heat transfer characteristics in a 180-deg round turned channel with discrete aluminum-foam blocks |
International Journal of Heat and Mass Transfer, Vol. 71, pp. 133-141, 2014 |
鄭澤明、曾憲中、Rui Xu |
2014/04 |
2.315 |
|
|
3 |
副教授 |
鄭澤明 |
JCR_B級 |
Flow Visualization and Heat Transfer Characteristics of Oscillating Fluid through Pin-Fin Array in a Rectangular Channel |
Advances in Mechanical Engineering, Vol. 2013, Article ID 283830, pp. 1-7, 2013. |
鄭澤明、曾憲中、Wei-Ting Hsu, Guan-Wei Xu |
2013/11 |
1.062 |
|
|
4 |
副教授 |
鄭澤明 |
JCR_C級 |
Experimental analysis of mixed convection heat transfer on heat sink of led lamp |
Transactions of the Canadian Society for Mechanical Engineering, Vol. 37, No. 3, pp. 693-702, 2013. |
曾憲中、鄭澤明 |
2013/12 |
0.302 |
|
|
5 |
副教授 |
鄭澤明 |
JCR_C級 |
Flow Visualization and Thermal Behavior of Oscillating-Move Pin Arrays with Symmetrical Impinging Jets |
Journal of the Chinese Society of Mechanical Engineers, Accepted, 2014. |
鄭澤明、曾憲中、Chi-Huang Liu |
To be published/2014 |
0.274 |
|
|
6 |
副教授 |
鄭澤明 |
非JCR |
Numerical Simulation and Flow Behaviors of Taylor Flow in Co-Axial Rotating Cylinder |
International Journal of Engineering and Technology Innovation, Vol. 4, No. 2, pp. 69-76, 2014. |
曾憲中、鄭澤明、Wei Ping Ma |
2014/4 |
|
|
|
7 |
副教授 |
鄭澤明 |
非JCR |
Experimental Study of Heat Energy Absorber with Porous Medium for Thermoelectric Conversion System |
Smart Science, Vol. 1, No.2, pp.1-5, 2013. |
鄭澤明、曾憲中、Hsu-Chieh Chou |
2013/12 |
|
|
|
8 |
副教授 |
鄭澤明 |
非JCR |
Design and Manufacture of an Energy-saving LED Lantern with Paper-cut Figure Projection Function |
Smart Science, Vol. 2, No.1, pp.13-19, 2014. |
鄭澤明、曾憲中、Chi-Huang Liu, Dong-Jhen Lin, B-Jun Yang |
2014/3 |
|
|
|
9 |
副教授 |
鄭澤明 |
非JCR |
Natural Convection Heat Transfer of Annular Metal Porous Medium Heat Sink of LED |
Applied Mechanics and Materials, Vol. 284-287, pp. 844-848, 2013. |
曾憲中、鄭澤明、Zhi-Ting Yeh |
2013/7 |
EI |
|
|
10 |
副教授 |
鄭澤明 |
非JCR |
A Study of Heat Transfer Characteristics of LED Heat Sink and Graphite Heat Sink Process Technology Development |
Applied Mechanics and Materials, Vol. 284-287, pp. 819-823, 2013. |
曾憲中、毛祚飛、鄭澤明、楊士震 |
2013/7 |
EI |
|
|
11 |
副教授 |
鄭澤明 |
非JCR |
Development of Thermoelectric Conversion System for Waste Heat Recovery of Automobile Engine Exhaust Gas |
Applied Mechanics and Materials, Vol. 284-287, pp. 713-717, 2013. |
鄭澤明、曾憲中 |
2013/7 |
EI |
|
|
12 |
副教授 |
鄭澤明 |
非JCR |
Cooling-performance estimation of the composite-graphite heat sink with annular conductive base for LED lamp |
Applied Mechanics and Materials, Vol. 496-500, pp. 9-12, 2013. |
Feng Li, Tzer-Ming Jeng, Shen-Chen-Chung Txeng, Po-Tsun Cheng |
2014/3 |
EI |
|
|
13 |
副教授 |
鄭澤明 |
非JCR |
Heat Transfer of Oscillating Fluid through Finned Heat Sink with Top Bypass Clearance |
Applied Mechanics and Materials, Vol. 479-480, pp. 192-196, 2013. |
鄭澤明、曾憲中、Wei-Ting Hsu |
2014/1 |
EI |
|
|
14 |
副教授 |
鄭澤明 |
非JCR |
Heat transfer of oscillating-move pin-fin heat sinks with circular impinging jets |
Applied Mechanics and Materials, Vol. 479-480, pp. 274-278, 2014. |
鄭澤明、曾憲中、Chi-Huang Liu |
2014/1 |
EI |
|
|
1 |
副教授 |
楊士震 |
非JCR |
A Study of Heat Transfer Characteristics of LED Heat Sink and Graphite Heat Sink Process Technology Development |
Applied Mechanics and Materials, Vol.284-287,pp.819-823,2013. |
Shie-Chen Yang, Tsuo-Fei Mao, Txer-Ming, Sheng-Chung Txeng, Tzung-Ying Shie, Chih-Liang Chen, Po-Tsun Chen |
2013/7 |
EI |
|
|
1 |
副教授 |
郭永聖 |
非JCR |
Influences of Thermal Gradient and Solidus velocity on Porosity Content |
Applied Mechanics and Materials Vol496-500 |
郭永聖 |
2014/01 |
|
|
|
2 |
副教授 |
郭永聖 |
國際研討會論文 |
Influences of Casting Geometry and Cooling Rate on Decdrite Cell Size of A201 Aluminum Alloy Castings |
2013中國鑄造週國際論文發表會 |
郭永聖 |
2013/11/2-5 |
|
|
|
3 |
副教授 |
郭永聖 |
非JCR |
Study of Solidification Time and Solidus Veloctiy on Porosity Formation in Strengh Aluminum Alloy Castings |
2014 2nd. Interational Conference on Mechanical, Automotive and Materials Engineering (CMAME) |
郭永聖 |
2014/03/26-28 |
|