| 編號 | 編號 | 職稱 | 申請種類 | 論文名稱 | 發表刊物、研討會名稱 | 作者人數 | 發表年、月、日 | Impact Factor |
| 103B_ME2_001 | 郭永聖-01 | 副教授 | 非JCR | Effects of Casting Geometry on the Mechanicel Properties of A201 Aluminum Alloy Castings in Chromite Sand Molds | Advanced Materials Research | 郭永聖 | 2015.01.23 | |
| 103B_ME2_002 | 郭永聖-02 | 副教授 | 非JCR | Study of Solidification Time and Solidus Veloctity on Porosity Formation in high Strength Aluminum Alloy Castings | Applied Mechanics and Materials | 郭永聖 | 2014.04.28 | |
| 103B_ME2_005 | 曾憲中-01 | 教授 | 非JCR | Design and Manufacture of a Novel LED Table Lamp with Flower Decoration | Smart Science, Vol.2,No.3,pp.126-131 | 鄭澤明、曾憲中、Wei-Ting Hsu,Chia-Hung Chang、Yu-Xiang Huang | 2014.08.17 | |
| 103B_ME2_006 | 曾憲中-02 | 教授 | JCR | Flow visualization of fluid flow through a U-bend channel with periodicalhigh-permeability porous blocks | International Communications Heat Mass Transfer, Vol. 57, pp. 91-99 | 鄭澤明、曾憲中、Guan-Wei Xu | 2014.07.10 | 2.124 |
| 103B_ME2_007 | 曾憲中-03 | 教授 | JCR | Heat transfer measurement of the cylindrical heat sink with sintered-metal-bead-layers fins and a built-in motor fan | International Communications Heat Mass Transfer, Vol. 59, pp. 136-142 | 鄭澤明、曾憲中 | 2014.10.06 | 2.124 |
| 103B_ME2_008 | 曾憲中-04 | 教授 | 非JCR | The Effect of a Piezoelectric Fan on Forced Air Heat Transfer in a Pin-Fin Heat Sink | Smart Science, Vol. 3, No.1, pp.1-6 | 鄭澤明、曾憲中、Chi-Huang Liu | 2015.02.01 | |
| 103B_ME2_009 | 曾憲中-05 | 教授 | JCR | Heat Transfer Performance of the Pin-Fin Heat Sink Filled with Packed Brass Beads under a Vertical Oncoming Flow | International Journal of Heat and Mass Transfer, Vol. 86, pp. 531-541 | 鄭澤明、曾憲中、Qiong-Yao Huang | 2015.03.04 | 2.522 |
| 103B_ME2_010 | 鄭澤明01 | 副教授 | 非JCR | Design and Manufacture of a Novel LED Table Lamp with Flower Decoration | Smart Science, Vol.2,No.3,pp.126-131 | 鄭澤明、曾憲中、Wei-Ting Hsu,Chia-Hung Chang、Yu-Xiang Huang | 2014.08.17 | |
| 103B_ME2_006 | 鄭澤明02 | 副教授 | JCR | Flow visualization of fluid flow through a U-bend channel with periodicalhigh-permeability porous blocks | International Communications Heat Mass Transfer, Vol. 57, pp. 91-99 | 鄭澤明、曾憲中、Guan-Wei Xu | 2014.07.10 | 2.124 |
| 103B_ME2_007 | 鄭澤明03 | 副教授 | JCR | Heat transfer measurement of the cylindrical heat sink with sintered-metal-bead-layers fins and a built-in motor fan | International Communications Heat Mass Transfer, Vol. 59, pp. 136-142 | 鄭澤明、曾憲中 | 2014.10.06 | 2.124 |
| 103B_ME2_008 | 鄭澤明04 | 副教授 | 非JCR | The Effect of a Piezoelectric Fan on Forced Air Heat Transfer in a Pin-Fin Heat Sink | Smart Science, Vol. 3, No.1, pp.1-6 | 鄭澤明、曾憲中、Chi-Huang Liu | 2015.02.01 | |
| 103B_ME2_009 | 鄭澤明05 | 副教授 | JCR | Heat Transfer Performance of the Pin-Fin Heat Sink Filled with Packed Brass Beads under a Vertical Oncoming Flow | International Journal of Heat and Mass Transfer, Vol. 86, pp. 531-541 | 鄭澤明、曾憲中、Qiong-Yao Huang | 2015.03.04 | 2.522 |
| 103B_ME2_015 | 鄭澤明06 | 副教授 | JCR | Combined convection and radiation heat transfer of the radially finned heat sink with a built-in motor fan and multiple vertical passages | International Journal of Heat and Mass Transfer, Volume 80, Pages 411-423 | 鄭澤明 | 2015.01.01 | 2.522 |
| 103B_ME2_018 | 楊士震01 | 副教授 | 國際期刊論文 | Feasibility Study of Micro-Hole wall Grinding by Micro-Elastic Abrasive Particles | Key Engineering Materials | FENG-Che Tsai.Shie-Chen Yang.Tsuo-Fei Mao.Hsi-Chuan Huang.Tsung-Lun Li | 2015.01.21 | E1 |
|
103B_ME2_019 |
楊士震02 | 副教授 | 國際期刊論文 | STUDIES OF MICRO-HOLE BURR IMPROVEMENT FOR ALUMINUM ALLOY MATERIALS USING VIBRASIVE GRINDING MACHINING | Key Engineering Materials | Shie-Chen Yang,Tsuo-Fei Mao,Feng-Che Tsai,His-Chuan Huang | 2015.01.21 | E1 |