| 編號 | 系所別 | 職稱 | 姓名 | 申請種類 | 種類點數 | 論文、作品、專利、競賽名稱 | 發表刊物、研討會、活動名稱 | 作者人數 | 作者順序 | 發表年、月、日 | 下載 |
| 02098001 | 機械工程系 | 講師 | 蘇宏明 | I | 3 | 方柱散熱座運用於燃料電池熱能轉換之研究 | 2009海峽兩岸現代工程技術應用研討會 | 4 | 1 | 98.05.06 | View |
| 02098002 | 機械工程系 | 副教授 | 郭永聖 | F | 4 | Influence of Porosity Content and Dendrite Cell Size on the Mechanical Properties of High Strength Aluminum Alloy Castings | AFS Trans.(EI) | 1 | 1 | 99.03 | View |
| 02098003 | 機械工程系 | 副教授 | 郭永聖 | I | 3 | 台灣地區技職校院推廣教育現況探討-以建國科大為例 | 2009 海峽兩岸高等技術與職業教育學術研討會 | 1 | 1 | 98.12.01 | View |
| 02098004 | 機械工程系 | 教授 | 曾憲中 | F | 4 | Small Wind Turbine Power Curves Obtained In Laboratory | IEEE, 2010 International Symposium on Computer, Communication, Control and Automation, Tainan, Taiwan | 4 | 2 | 99.05 | View |
| 02098005 | 機械工程系 | 教授 | 曾憲中 | F | 4 | Wind and Photovoltaic Solar Energy | 2010 5th International Conference on Green Energy Technology and Management, ChnagHua, Taiwan. | 3 | 1 | 99.06 | View |
| 02098006 | 機械工程系 | 助理教授 | 毛祚飛 | F | 4 | A High Pressure Spray Technology Using Sn-Bi Metal Alloy to Manufacture Rapid Wax Injection Mold | Internation Conference on Manufacturing and Engineering Systems | 4 | 1 | 98.10 | View |
| 02098007 | 機械工程系 | 助理教授 | 毛祚飛 | F | 4 | The Precise Processing of Abrasive Jet Polishing on the Free-Form Surface of SKD61 Mold Steel | Internation Conference on Manufacturing and Engineering Systems | 5 | 2 | 98.10 | View |
| 02098008 | 機械工程系 | 助理教授 | 毛祚飛 | F | 4 | Using TOPSIS to Taguchi optimization in Thin-Shell Rapid Tooling of Wax Injection Molds | Internation Conference on Manufacturing and Engineering Systems | 5 | 1 | 98.10 | View |
| 02098009 | 機械工程系 | 副教授 | 楊士震 | F | 4 | A High Pressure Spray Technology Using Sn-Bi Metal Alloy to Manufacture Rapid Wax Injection Mold | International Conference on Manufacturing and Engineering Systems |
4 | 2 | 98.10 | View |
| 02098010 | 機械工程系 | 副教授 | 楊士震 | F | 4 | The Precise Processing of Abrasive Jet Polishing on the Free-Form Surface of SKD61 Mold Steel |
International Conference on Manufacturing and Engineering Systems |
5 | 3 | 98.10 | View |
| 02098011 | 機械工程系 | 副教授 | 楊士震 | F | 4 | Using TOPSIS to Taguchi optimization in Thin-Shell Rapid Tooling of Wax Injection Molds |
International Conference on Manufacturing and Engineering Systems |
5 | 2 | 98.10 | View |
| 02098012 | 機械工程系 | 副教授 | 洪信安 | F | 4 | Using TOPSIS to Taguchi optimization in Thin-Shell Rapid Tooling of Wax Injection Molds | International Conference on Manufacturing and Engineering Systems |
5 | 3 | 98.10 | View |